car seats
A: If the shoulder belt covers any part of the green label on the armrest of bay latch SI in backless booster mode, the shoulder belt should be routed under the armrest. If the shoulder belt does NOT cover any part of the green label on the armrest, keep it on top of the armrest.
A: At the belt path, which is where either the lower anchors, or the lap belt portion of the seatbelt is threaded through the seat. Your car seat should move less than 1” side-to-side or front-to-back when installed securely. If you are feeling uncertain about your install, call customer service, +1(866) 798-7866, or set up an appointment with one of our certified Child Passenger Safety Technicians.
A: Both the model number and date of manufacture of your Matcha are located on the underside of the car seat.
A: Your car seat’s model number and date of manufacture are located on the underside of the car seat.
A: Both the model number and date of manufacture of your Saffron™ SI are located on the underside of the car seat and under the soft goods.
A: Both the model number and date of manufacture of your bay latch SI are located on the underside of the car seat.
A: Both the model number and date of manufacture of your Rue car seat are located on the underside of the car seat.
A: The recommended position for Rue LX’s carry handle is in the upright “carry” position when in the vehicle, but any of the locked positions can be used.
A: This base is compatible with all Joie infant car seats.
A: Most likely – all of our car seats are designed to fit into most US vehicles. The dimensions of Matcha Spin SI are L 19.7 x W 18.8 x H 22.5-33.6 inches. Please refer to both your car seat manual and your vehicle owner's manual for information on how to install your car seat safely in your vehicle.
A: Pepper™ Spin SI measures L 21 x W 19.2 x H 25.9-34.2 inches and fits in most vehicles. Please refer to both your car seat manual and your vehicle owner’s manual for information on installing your car seat safely in your vehicle.
A: Most likely – all of our car seats are designed to fit into most US vehicles. The dimensions of the Rue LX Spin with base attached and handle in the carry position are approximately 25.8” L x 17.5” W x 26” H. Please refer to both your car seat manual and your vehicle owner’s manual for information on how to install your car seat safely in your vehicle.
A: Most likely – all of Joie's car seats are designed to fit into most US vehicles. The dimensions of the bay latch SI are l 16-18 x w 19 x h 24 inches with the headrest in the lowest position. Please refer to both your car seat manual and your vehicle owner’s manual for information on how to install your car seat safely in your vehicle.
A: Our car seats are designed to fit into most US vehicles. The dimensions of saffron™ are 22” L x 19” W x 24.5-33” H.. Please refer to both your car seat manual and your vehicle owner’s manual for information on installing your car seat safely in your vehicle.